Mark III Tactical Mil-Dot 3-9X42/Scope Adaptor Mount/Red Dot Combo Package
Product Details
- Shipping Weight: 1.8 pounds (View shipping rates and policies)
- Shipping: Currently, item can be shipped only within the U.S.
- ASIN: B001NIE3ZG
- Item model number: STM3942G/D
By : NcStar
Price : $165.00
You Save : $34.00 (17%)
Product Description
Amazon.com
Built using the Ultimate Sighting System (USS), the Mark III Tactical 3-9x42 scope combines the benefits of a Mark III tactical scope with the advantage of a backup red dot sight. The system is equipped with a Mark III tactical scope and a specially designed MRD34 ring. The ring, which mounts directly to the ocular lens housing with a built-in Weaver-style platform, stabilizes the DDAB red dot sight so you can lock confidently lock on your target. With the scope and sight, the USS is perfect for both close quarter battle and long-range shooting.
The scope also includes fully multicoated lenses for brightness and clarity, along with a red/green illuminated mil-dot reticle with multiple brightness settings. Other features include open target turrets, a bullet drop compensator calibrated for the .223 cartridge with a 55-grain bullet, a rotating mount for users who prefer offset functionality, a built-in sunshade, and a quick-focus eyepiece.
Specifications
- Magnification: 3-9x
- Objective lens diameter: 42mm
- Field of view: 36.8 to 12.0 100 yards
- Eye relief: 2 inches
- Exit pupil: 9.3 to 3.1mm
- Reticle: Mil-dot
- Click value: 1/2 MOA
- Exterior finish: Matte black
- Lens coating: Green
- Mount: Integrated Weaver-style quick release
- Length: 7.54 inches
- Weight: 16.7 ounces
Nc Star Mark Iii Tactical Mil-Dot 3-9X42/Scope Adaptor Mount/Red Dot Combo Package STM3942G/D
Product Features
- Mark III tactical scope with backup red dot sight
- Fully multicoated lenses offer brightness and clarity
- Red/green illuminated mil-dot reticle with multiple brightness settings
- Ring mounts directly to ocular lens housing with Weaver-style platform
- Measures 7.54 inches long; weighs 16.7 ounces
Customer Reviews
As of 09/29/2010 the picture on this page is not the correct scope and the description is not complete for the mil dot version of this scope (no red dot info). Copy this Item model number STP3942G/D and paste it on Amazon's search engine. There you will see the P4 sniper version of this scope and the adapter mount and the red dot reflex site and the quick release system (picatinny/weaver) that you will be getting if you purchase this mil dot version.
I am new to guns so, for accurate reviews read others. The scope parallaxes at before 100 yards which I believe are normal for a zoom scope. The view becomes clear at about 50 yards and beyond for me when I took it outside. As for the red dot, if it were a laser measured out to 25 feet the dot would measure about 3 inches, that is how it appears to me. As for the mount sits low to clear rear sites, I had just enough clearance for my Troy industries rear iron sights. The Troy's are the lowest folding sights that I know of. So you may need a short riser or remove the rear sites. The quick release mount wiggled after mounting it but after following the directions it now sits solid as a rock and operates great.
This scope is great and what a deal,was on the paper at a 100 yrds and I dialed it in to the black.I have a AR15 H-Bar and it sits high on the carry handle,like the Manual said it would. Getting a Delta Cheek piece so I can line up. The optics were crystal clear,slight focus adjustment needed, you need the 42mm objective for the light,didn't try the red or green since I didn't need them and didn't occur to me to use them. The mount is a tight fit and stays on zero,I don't know if the zero changes when you go up in power since I sighted in at 6 magnification. The iron sights are not obscured by the mount. The down side is, the scope was tilted to the right and I had to file the left side of the mount and put tape on the right side to level it up.It sits too far forward when the Delta cheek was installed,should have bought the quick relase model so I could put it on a rail and adjust the distance.Hind sight is 20-20. One additional thing, the wheel mount comes loose after a while, unless you want to loc tite it in I would get another type mount
Mark III Tactical Mil-Dot 3-9X42/Scope Adaptor Mount/Red Dot Combo Package
Related Product
0 comments:
Post a Comment